Aximat Institutional Hinges for Phenolic/Thin Panels

Aximat 300 Institutional Hinge for Thin Panels
• Specifically designed for thin panels such as Phenolic material
• Sleek sophisticated design, only 5 mm (3/16”) of knuckle is visible
• 3D Adjustment
• During overlay (side to side) adjustment, the knuckle moves with the door so that there is no unsightly
gap appears between door’s edge and knuckle
• Door overlay (side to side) adjustment is on the arm component as opposed to the cup component;
offering continuous adjustment of +1 /-2 mm in both directions
• Depth adjustment of ± 1 mm is achieved with oblong holes
• Height adjustment (up and down) of ± 2 mm is on the door component
• The “Safety Screw” can be pre-installed at any time as it does not effect the adjustments - this very
important screw can be pre-installed in the shop so its not overlooked at the job site, avoiding
expensive call backs
• Integrated catch keeps doors closed, no additional magnetic catches required
• Tested in accordance with ANSI/BHMA Grade 1 standards
• Hinges come complete with special coated screws