Ideal for bonding wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber
Designed for wet, frozen or treated lumber and ideal for metal, brick, concrete, ceramics and most large-panel substrates
Reduces the amount of nailing and helps eliminate squeaky floors
Excellent water-resistance and permanently flexible
Exceeds the performance requirements of the American Plywood Association AFG-01
Specification, ASTM D3498 and ASTM C557, HUD/FHA Use of Materials Bulletin #60
-
APPLICATION GUIDELINES
Application temperature: 0°F to 100°F
Service temperatures: -20°F to 120°F
Methods of application: Cartridge/caulking gun
Coverage (maximum): Approximately length of bead according to bead diameter.
Working time: Approx. 20-30 minutes for a 1/4” bead.
Working surfaces: Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association.
Cleanup: Tools/adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions when using solvents.
Note
Test solvent on an out-of-the-way area to make sure it will not mar or attack surface.
LIMITATIONS
Not designed for continous submersion or for our use on polystyrene foam, vinyl-coated drywall or rigid plastics. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive.