• Worldwide
  • Contact

set_component

  • Mounting
  • Calibrated Height Adjustment
  • Depth Adjustment
  • Hinge Requirement
Or select product features below
Add to Cart

Please select an Item

Add to Shopping List

Please select an Item

Select product features

Click to compare Items on this page

Add mandatory components

Concealed hinges

Drilling pattern

Mounting

    Type of closing

      Product details

      Provides excellent access to the interior of the cabinet.

      Mounting

      Left or right side of the cabinet

      Installation

      Minimal space of approximately (3 1/8”) 80 mm is taken up by the door in the maximum open position.

      Width

      Max door width: (24”) 610 mm (12”/305 mm per leaf)

      Height adjustment

      +/- (1/16”) 2

      Depth adjustment

      + (1/8”) 2.5 mm

      Note

      Weight capacity depends on the number of hinges.

      Order reference

      Concealed hinges are required; 329.17.507 (hinge) and 329.71.502 (mounting plate) are recommended.

      Optional accessories

      Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
      Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
      16-Nov-2018

      set_component

      • Mounting

      • Calibrated Height Adjustment

        Height adjustment of hinges assembled with the sliding components is achieved through a cam. Through this alignment a parallel movement of the component in the track is achieved. The result is a smooth movment without any binding. Note: The sliding block does not have a load-bearing function. Therefore it must slide freely inside the track.

      • Depth Adjustment

        Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the same hinge. Depth adjustment should be made in conjunction with the hinges mounted on the opposite door. This adjustment is useful to keep the “L” value constant all along the front of the furniture.

      • Hinge Requirement

        Note: Total width is the combination of both leaves.

      Note

      Please select an Item via the features or Item table in order to add it to the cart.