Drill a 10 mm boring hole at the desired spot into one cover layer. Choose a boring depth that removes the core and only the glue on the bottom cover layer.
Press the Aerofix® 100 into the bore hole, it will lock itself into place mechanically while releasing the glue from the capsule. This makes it possible for screws to be screwed into the insert before the glue cures.
Pressing in the sleeve activates the chemical adhesive process. 1-K-PUR adhesive spreads out onto the upper and lower cover layers and hardens completely within 16 hours. After the adhesive has hardened, the adhesive sleeve is fully functional under normal loads.