Ball Bearing Runners, Full Extension, 100 lbs Weight Capacity

Black, 22"

Item no. 422.91.351

  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.


    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.


    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.


    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.


    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.


    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.


    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.


    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.


    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options


    On shelves


    Side mounted

    Base mounted I

    Base mounted II



    On drawers


    Groove mounted

    Side mounted

    Base mounted�




    On cabinets


    Side mounted


    Base panel mounting

    Black, 22"

    Item no. 422.91.351

    Item no. 422.91.351


    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Call us at 800.423.3531 if you have questions about availability.

    Pair Min. 1
    See Required Products
    Item details
    Accuride 3832 DO With hold-in device in closed position and hold-out device in extended position

    Model series

    3832 DO


    Side mounted

    Type of pull out

    Full extension

    Load bearing capacity

    (100 lbs.) 45 kg


    For drawers up to 406mm (16") wide


    • BMHA Certified Grade 1 HD-100
    • Hold-in detent
    • Features low profile for shallow drawers
    • Easy lever disconnect
    • For keyboards or any application requiring a positive hold-out
    • Special detent out to hold drawers in an open position
    • For optimal performance make drawers 1 1/16" (27 mm) less than cabinet opening


    320 mm


    442 mm


    Product Features

    Order reference

    On request also available in black galvanized or white coated from an order quantity of 10 pairs.

    Optional accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email:

    Ball Bearing Runners, Full Extension, 100 lbs Weight Capacity

    Black, 22"


    Please select an Item via the features or Item table in order to add it to the cart.