- Home
- Products
- Furniture, Kitchen & Living Solutions
- Connectors & Shelf Supports
- Connectors
- Connector Housing, Rafix 20 system, with dowel, zinc alloy

Dowel Stud, Rafix SE 32 System, without Ridge, Zinc
With tightening element, For wood thickness 19 mm, drilling depth D: 14.2 mm, dim. A: 9.5 mm, nickel-plated
Item no. 263.13.705







- Rafix connector housing overview
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- Better pull-out strengths
- Valuable, robust appearance
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
- Connector housing made from plastic
- Connector housing with dowel
- With tightening element made from zinc alloy for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- High tolerance range (± 0.5 mm), compensation through long tightening distance (2.5 mm)
- High pull-out strengths
- For heavy loads
- Rafix 20 and 30 mounting options
- Rafix 20/Rafix Tab 20 quick comparison information
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
Rafix 20 | ![]() | ||
![]() | |||
Rafix 20 Tab | ![]() | ||
Rafix 30 | ![]() | ||
Montage
Die Verbindergehäuse Rafix 20 und 30 weisen zur Aufnahme eines Verbindungsbolzens zwei Ausführungen auf:
(1) ohne Wulst: | ![]() | ![]() | (2) mit Wulst: | ![]() | ![]() | |||||
Die Konstruktionsbödenkönnen stirnseitig und von oben eingesetzt werden. | Die Konstruktionsböden können nur von oben eingesetzt werden; dadurch sind die Bauteile vorfixiert. | |||||||||
![]() | |
Durch die spezielle Konstruktion der Gehäuse ist ein Zugriff von oben auf das Anzugselement möglich. Dadurch können die Verbinder, z.B. bei Bodentablaren, verdeckt eingebaut und über eine 10-mm-Durchgangsbohrung verspannt werden. Die Durchgangsbohrung wird danach mit einer Abdeckkappe verdeckt. Das Anziehen des Verbinders von unten erfolgt komfortabel durch 25°-Stellung des Schraubendrehers. |
Rafix 20 | ![]() | ||
Rafix 20 Tab | ![]() | ||
Filter
Complete your selection

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Dowel Stud, Rafix SE 32 System, without Ridge, Zinc
With tightening element, For wood thickness 19 mm, drilling depth D: 14.2 mm, dim. A: 9.5 mm, nickel-plated
Without ridge







Note
Please select an Item via the features or Item table in order to add it to the cart.