Cranked Butt Hinge, Neuform, for Door Thickness 19-20 mm

For overlay doors,, Nickel plated polished

Item no. 307.04.708

  • Butt hinges

    Left hand or right hand hinge

    To distinguish between hinges with screw-on flanges, view them in open position from the front against the countersunk screw hole side.

    If the female flange (= door flange) is on the left, it is a left hand hinge. If it is on the right, it is a right hand hinge.

     
     
     
     
     

    ⓐ = female flange (= door flange)

     

    ⓑ = male flange (= side flange)

    Left hand hinge

    Right hand hinge

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Crank

    There are 5 different types of crank.

     

    Crank A, straight hinge

    For butting inset or overlay doors.

    The hinge pin is positioned centrally between the two flanges.

    Crank B

    For set back doors.

    One flange is cranked by the material thickness.

    Crank C

    Crank C is equivalent to crank B, but causes the door to protrude.

    Crank D

    For rebated doors, with shorter female flange.

    Crank L1

    For butting overlay doors. Door opening angle 270°. The hinge has an external knuckle.

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Number of furniture hinges per door

    The number of concealed hinges per door depends on:

    • Door width and height
    • Door weight
    • Door material

    The number of furniture hinges shown in the diagram is a recommendation and provides a guideline for 600 mm wide doors made from 19 mm chipboard. Trial mounting is recommended. The distance X between the furniture hinges must always be as long as possible for stability reasons.

    According to the example diagram two furniture hinges have to be fitted with a door height of 900 mm.

    For overlay doors,, Nickel plated polished

    Item no. 307.04.708

    Item no. 307.04.708
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    Call us at 800.423.3531 if you have questions about availability.

    Piece Min. 1
    See Required Products
    Item details

    Finish

    Polished nickel

    Length

    Barrel: (1 9/16") 40 mm

    Flange thickness

    3 mm/4 mm

    For door thickness

    (3/4 - 13/16") 19 – 20 mm

    Side panel thickness

    from (11/16") 17 mm

    Installation

    For screw fixing

    Mounting

    Left or right

    Material

    Brass
    Show more information
    Optional accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    16-Nov-2019

    Cranked Butt Hinge, Neuform, for Door Thickness 19-20 mm

    For overlay doors, Nickel plated polished

    • For door thickness 19-21 mm, side panel thickness min. 17 mm

    Note

    Please select an Item via the features or Item table in order to add it to the cart.