Duramaster™ Sealant, Titebond®


Complete your selection



Requested amount is in stock.
Limited stock available.
Item no longer available

Call us at 800.423.3531 if you have questions about availability.

Duramaster™ Sealant, Titebond®

00351005 product photo

Duramaster™ Sealant, Titebond®


Item no. 003.51.005
00351006 product photo

Duramaster™ Sealant, Titebond®


Item no. 003.51.006
00351007 product photo

Duramaster™ Sealant, Titebond®


Item no. 003.51.007
00351020 product photo

Duramaster™ Sealant, Titebond®


Item no. 003.51.020
00351021 product photo

Duramaster™ Sealant, Titebond®

Medium Bronze

Item no. 003.51.021
Product details

The first elastomeric, water-based sealant with 100% joint movement*
*Clear offers 25% joint movement
For interior and exterior applications
UV resistant
For windows and doors
For vinyl, metal, glass, wood, PVC, concrete, aluminum and all types of siding
Spans up to 2” wide, stays flexible, crackproof, paintable and VOC-compliant
Certified to Federal Specification TT-S-00230C , ASTM C920, CLASS 100/50 (white and colors), ASTM C920, Class 25/25 (clear), ASTM C834, Type OP, Grade -18ºC, LEED v4.1 (white and colors), AAMA 803.3-16 Type I (white and colors),
AAMA 808.3-16 Type I (white and colors)

Application Temperature: Above 40°F and below 120°F
Service Temperature Range: 0°F–160°F
Method of Application: Cartridge/caulking gun
Working time: Approx. 15 minutes for a 1/4" bead.
Working surfaces: Surfaces should be cleaned down to the original substrate, dry and free from excessive oil, grease, water, dirt or any material that may deter adhesion.
Painting: 2-4 hours with a high-performance water-based (latex) paint
Cleanup: Clean excess material with a damp cloth. Clean hands and tools with soapy water. Scrape dried excess.

Do not apply if rain is expected within 24 hours. Air, sealant and surface temperature should be above 40°F and rising. Protect from rain for 24–48 hours after application. Dry time may be extended in humid or cold conditions. Painting may occur within 2-4 hours after application with a high-quality water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is dry to the touch and does not transfer, remove
masking tape. If joint depth exceeds 1/2", use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Sealant may appear to have a different tint/color when initially extruded until it is fully dried/cured. Not designed for continuous submersion or use below the waterline. Store unused
product in dry location at or below 70°F (21°C). Not for use with nail holes or butt joints.

  • Coverage (maximum): Approximate length of bead according to bead diameter:
    Container bead = 10.1 oz Cartridge
    1/8" bead = 123 ft.
    1/4" bead = 31 ft.
    3/8" bead = 14 ft.
    1/2" bead = 8 ft.
    10.1 oz. Cartridge

Product type

Duramaster™ Sealant
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com