EHS Frame Component, with Side Guide

Keku suspension fitting,, with Varianta screws

Item no. 262.49.368

  • Keku mounting options
  • Einhängebeschlag EH

    Aufschiebebeschlag AS

    Aufdoppelungsbeschlag AD

    bestehend aus:

    • Rahmenteil/Flächenteil EH/EHS
    • Plattenteil EH
    • Rahmenteil AS/ASR
    • Plattenteil AS
    • Winkelteil AD
    • Plattenteil EH

    Ergänzend: Distanzplatte EH/AS für Plattenteil

  • Application examples for Häfele Keku R room system
  • Häfele Keku R room system application examples

    Partition walls

    Wall height max. 6,000 mm

    Wall thickness 120 mm or to required thickness

    Vertical joint

    Wall construction:

    Supporting profiles joined with 70/70 slide-in connectors, connecting strips of panel material (Multiplex, MDF) or 8 mm threaded bars (M8 nuts/washers). Floor-ceiling connection with floor and ceiling profiles and profile connectors. Panels are hooked in with Keku EHS fittings.

    Wall cladding

    Unlimited dimensions

    Wall distance 40 mm – continuous assembly

    Panel hooked-in

    Wall construction:

    The supporting profile is engaged in the floor profile with the profile connector. Height compensation of up to 30 mm is possible. The profile is fixed to the wall with the 3-D wall fastener. Adjustment is possible in all directions with the 3-D wall fastener. The panels are secured to the supporting profiles with Keku fittings.

    Ceiling cladding

    Ceiling - longitudinal insertion

    Supporting profiles suspended with threaded bars, M8 nuts, approved metal plugs and 3D fittings.

    On the walls, ceiling profile for mounting the supporting profiles with profile connectors and support of the trim.

    Large-surface ceiling panels, slide-in mounting with Keku EHS fittings with lip. Trims with slide-in mounting with Keku ASR fittings. (Only slide in narrow trims). Panel length at intervals (length/32) with same drilling pattern for Keku fittings. With gap profile for panel gap of 3–30 mm.

    Cabinet structures

    Top unit doors that are mounted to the supporting profile provide easy access to the building equipment.

    More information can be found in the application brochure at www.hafele.com.

  • Häfele Keku R room system components
  • Häfele Keku R components

    Häfele Keku R is used for interior fitting stores and exhibition booth construction.

    The Häfele Keku R room system is a substructure made of aluminium profiles, used for cladding walls and ceilings..

    It is also suitable for creating freestanding lightweight and double partitions.

    Different fitting components are available for fixing the supporting profiles.

    1 supporting profile

    2 floor and ceiling profile

    3 profile connector

    4 3D wall mounting / ceiling installation set

    5 3-D wall spacer

    6 threaded bar

    7 perforated gap profile

    8 non-perforated gap profile

    9 gap profile securing clip

    10 system screw

    11 adjusting profile

    12 height adjusting screw

    13 vertical connector

    14 corner bracket 90°

    15 gap profile

    16 panel connector

    17 tie bar

    18 H-profile slide-in connector

    19 insert suspension fitting

    20 slide-in connector

    ⓐ ASR frame component

    ⓑ AS panel component

    ⓒ EHS frame component

    ⓓ EH panel component

    Panel attachment

    The Keku R system fittings that are attached to the supporting profile allow cladding elements to be removed and hooked-in again, e.g. for retrofitting.

    (1) ASR frame component

    (2)AS panel component

    (3)3D wall mounting/ceiling installation set

    (4)EHS frame component

    (5)EH panel component

    Filter

    Complete your selection

    Keku suspension fitting,, with wood screws

    Item no. 262.49.368

    Item no. 262.49.367

    Keku suspension fitting,, with Varianta screws

    Item no. 262.49.368

    Item no. 262.49.368

    Your search for null returned no results.

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    Call us at 800.423.3531 if you have questions about availability.

    Piece Min. 200
    Item details

    The side guide

    • prevents the workpiece from slipping sideways
    • keeps the workpiece edges parallel
    • creates a lateral connection in conjunction with the panel

    Suitable for

    Screwing fixing in 32 mm series drilled holes

    Material

    Plastic (polycarbonate)

    Color

    Black

    Note

    For Varianta screw mounting, use 3mm or 5mm.

    For wood screw mounting, use #8 flat head.

    Must order screws separately.

    • For fastening panels to frames
    • Temperature range: -100°C (-148°F) to +135°C (+275°F)
    • Do not treat with chemical solutions or aggressive greases
    • Do not adjust by hammering
    • Not for suspended loads such as ceiling panels
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    12-Jul-2020

    EHS Frame Component, with Side Guide

    Keku suspension fitting, with Varianta screws

    • Keku EHS frame component for screw fixing to substructures with side guide