Flap Ex Flap Hinge, for Laundry Hampers

Item no. 365.52.708

  • Sample measurements table for calculating the flap weight in kg – without handlefor 19 mm chipboard, 0.65 g/cm³

     
     
     
     
    Flap heightmmFlap widthmm
    300400500600700800900100011001200
    3001.11.51.92.22.63.03.33.74.14.4
    3501.31.72.22.63.03.53.94.34.85.2
    4001.52.02.53.03.54.04.44.95.45.9
    4501.72.22.83.33.94.45.05.66.16.7
    5001.92.53.13.74.34.95.66.26.87.4
    5502.02.73.44.14.85.46.16.87.58.2
    6002.23.03.74.45.25.96.77.48.28.9
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Sample measurements table for calculating the flap weight in kg – with bar handle (0.1 kg/100 mm)for 19 mm chipboard, 0.65 g/cm³

     
     
     
     
    Flap heightmmFlap widthmm
    300400500600700800900100011001200
    3001.41.92.42.83.33.84.24.75.25.6
    3501.62.12.73.23.74.34.85.35.96.4
    4001.82.43.03.64.24.85.35.96.57.1
    4502.02.63.33.94.65.25.96.67.27.9
    5002.22.93.64.35.05.76.57.27.98.6
    5502.33.13.94.75.56.27.07.88.69.4
    6002.53.44.25.05.96.77.68.49.310.1
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Sample measurements table for calculating the flap weight in kg – without handlefor aluminium frames (19 x 20.6 mm) with 4 mm thick glass panel

     
     
     
     
    Flap heightmmFlap widthmm
    300400500600700800900100011001200
    3001.11.41.82.12.42.73.03.43.74.0
    3501.31.72.02.42.83.13.53.94.24.6
    4001.41.92.32.73.13.54.04.44.85.2
    4501.62.12.53.03.54.04.44.95.45.8
    5001.82.32.83.33.84.44.95.45.96.4
    5501.92.53.13.64.24.85.35.96.57.1
    6002.12.73.33.94.65.25.86.47.07.7
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Sample measurements table for calculating the flap weight in kg – without handlefor aluminium frames (45 x 20.6 mm) with 4 mm thick glass panel

     
     
     
     
    Flap heightmmFlap widthmm
    300400500600700800900100011001200
    3002.02.52.93.33.84.24.75.15.66.0
    3502.22.73.23.74.24.75.25.76.26.7
    4002.53.03.54.14.65.25.76.36.87.3
    4502.73.33.94.55.15.66.26.87.48.0
    5002.93.54.24.85.56.16.87.48.08.7
    5503.13.84.55.25.96.67.38.08.79.4
    6003.34.14.85.66.37.17.88.59.310.0

    Item no. 365.52.708

    Item no. 365.52.708
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    Call us at 800.423.3531 if you have questions about availability.

    Piece Min. 1
    See Required Products
    Item details

    Suitable for

    Particularly suitable for installing in cabinets with 540.02.112

    Installation

    For installation of the front flap, 2 cup hinges and a Mini Latch are required

    Mounting

    Screw the angle bracket to front panel and screw-mount bearing to cabinet side panel; see mounting drawing on the right. Push round rod into the screw-on bearing between the two coil springs.

    Note

    Please order concealed hinges and Mini‐Latch catch separately.

    Note

    The hinge with the coil springs is designed to support a particle board front with the maximum dimensions 590 mm (23 1/4”) high, 400 mm (15 3/4”) wide and 19 mm (3/4”) thick and a maximum weight when full of 5 kg (11 lbs).

    • Completely assembled
    • The door is opened under spring tension by approximately 27° by applying pressure directly to the door
    • When the door is closed, the flap is pushed back into the cabinet and secured by the Mini Latch
    • The hinge with the coil springs is designed to support a particle board front with the maximum dimensions 590 mm (23 1/4”) high, 400 mm (15 3/4”) wide and 19 mm (3/4”) thick and a maximum weight when full of 5 kg (11 lbs).

    Material

    Steel
    Sleeve and screw-on bearing: Plastic

    Finish

    Nickel plated
    Product Features

    Supplied with

    1 Angular bracket

    1 Round rod with sleeve

    2 Washers

    2 Spiral springs

    1 Screw-on bearing

    Order reference

    Please order concealed hinges and Mini‐Latch catch separately.

    Optional accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    26-Apr-2019

    Flap Ex Flap Hinge, for Laundry Hampers

    • see key

      (1) spiral spring length 126 mm

      (2) spiral spring length 90 mm

      (3) angular bracket

      (4) washer

      (5) screw-on bearing

      (6) washer

      (7) base panel

      (8) side panel

      (9) front flap

    Note

    Please select an Item via the features or Item table in order to add it to the cart.