Unable to detect / invalid code :
Please try again.
Häfele supplies sliding door fittings for any application under the Slido brand. These fittings are particularly outstanding because of the wide range of different combination options.
|
Variants:
Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered
Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room
Variants:
Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered
Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room
Variant:
Fold – these fittings are suitable for creating folding walls
Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.
Their ease of installation is truly impressive, and also have the following advantages when they are being used:
Folding walls are used to subdivide rooms. Pushing a folding wall to one side and stacking the doors provide unrestricted access.
Suspension at the side of the doorThe doors are connected to each other with hinges. The doors can be stacked at the right and/or the left hand side.
In the open position, the doors are at an angle of 90° to the closed wall below the running track. If the suspension point is in the centre of the door width, a bottom guide is not necessary, if the system is operated carefully. The suspension point can be at the side edge, near the side edge or in the centre of the door, depending on the fitting.
 |
Suspension at the side edge |
 |
Suspension near the side edge |
 |
Suspension in the centre of the door |
| Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |
Folding and access door fitting, corner and center suspension, for door weight up to 100 kg,
Corner suspension
Centre suspension
Corner suspended
B | 35–44 mm | 45 – 54 mm | 55–60 mm |
E | 5 mm | 7 mm | 9 mm |
A = wall distance between wall and door edge
B = door thickness
E = opening width rotating range
Other wall connection options can be found in the installation instructions.
Center suspended
B | 35–44 mm | 45 – 54 mm | 55–60 mm |
E | 5 mm | 7 mm | 9 mm |
A = wall distance between wall and door edge
B = door thickness
E = opening width rotating range
Other wall connection options can be found in the installation instructions.
Corner suspended
 | Floor spring | |
 | Flush bolt | |
 | Mortice lock | |
 | Access door |
Center suspended
| Floor spring | | Flush bolt | ||
| Mortice lock | | Access door |
Corner suspended
These are only few options that can be implemented. The number of flange hinges depends on the height of the door leaf.
Center suspended
These are only few options that can be implemented. The number of flange hinges depends on the height of the door leaf.
Corner suspended
K = (C – A – D – D – D – A) / 4
Corner suspended
K = (C – A – D – D – D – A) / 4
A = wall distance between wall and door edge
C = total system width
D = gap dimension
K = door width
Center suspended
K = (C – A – 50 – D – D – D – A) / 3.5
Center suspended
K = (C – A – 50 – D – D – D – D – A) / 4.5
