- Home
- Products
- Sliding, Folding & Tambour Door Fittings
- Fittings for Architectural
- Folding wall fitting, Hawa 20-c Faltwand 120, set

Folding wall fitting, Hawa 20-c Faltwand 120, set
for 3 to 7-leaf wooden folding sliding doors, height adjustable, for door weights up to 120 kg, for door widths up to 1,000 mm









- Sliding door applications
- Slido sliding door systems are available for wall mounting or ceiling installation
- There are many different facing options for Slido sliding door systems
- Slido sliding door systems can be used for door weights from 40 to 240 kg
- Slido sliding door systems are also available with electric drive
- Space-saving room elements block the view of the areas behind them
- Combination with coloured surfaces
- Modern room design
- Space-saving room elements
- Brightness and transparency in the rooms
- Modern room design using coloured or textured glass
- Combination with fixed glass panel elements
- Space-saving room elements
- Room division
- Large passageways can be partitioned off
- Space-saving, folded door stack when open
- Noise reduction
- Lower accident risk
- Increased operating convenience
- Material-friendly
- Sliding doors that close gently and quietly increase comfort in the living and working environments.
- Information on folding sliding doors/walls
Slido – Sliding door fittings from Häfele
Häfele supplies sliding door fittings for any application under the Slido brand. These fittings are particularly outstanding because of the wide range of different combination options. |
Sliding door applications
Fittings for wooden sliding doorsVariants:
Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered
Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

Variants:
Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered
Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

Variant:
Fold – these fittings are suitable for creating folding walls

Soft closing systems from Häfele
Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.
Their ease of installation is truly impressive, and also have the following advantages when they are being used:


Fittings for folding walls
Folding walls are used to subdivide rooms. Pushing a folding wall to one side and stacking the doors provide unrestricted access.
Suspension at the side of the doorThe doors are connected to each other with hinges. The doors can be stacked at the right and/or the left hand side.
In the open position, the doors are at an angle of 90° to the closed wall below the running track. If the suspension point is in the centre of the door width, a bottom guide is not necessary, if the system is operated carefully. The suspension point can be at the side edge, near the side edge or in the centre of the door, depending on the fitting.
![]() |
Suspension at the side edge |
![]() |
Suspension near the side edge |
![]() |
Suspension in the centre of the door |
-
Catalog links available.
Please select an Item.
Filter
Complete your selection

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Folding wall fitting, Hawa 20-c Faltwand 120, set
for 7-leaf wooden folding sliding doors, height adjustable, for door weights up to 120 kg, for door heights up to 1,000 mm,









Note
Please select an Item via the features or Item table in order to add it to the cart.