Häfele America Co.
-
Shop Products
- Residential
- Commercial
- Services
- About Häfele
Add Item to Cart:
- Home
- Products
- Sliding, Folding & Tambour Door Fittings
- Tambour Fittings for Furniture
- Milano Appliance Garage Kit
Milano Appliance Garage Kit
- Maximum stability and quality thanks to excellent workmanship
- Particularly suitable for special applications
- Good running properties due to the use of tambour door glides
- As ready for installation tambour door module, rolled up or rear panel running system
- Variable areas of applications, and also suitable for kitchens, offices, residential areas and security areas in banks, IT, medicine
- Many different profiles and installation options are available
- Available colours: Silver coloured anodized, stainless steel coloured anodized or powder coated in RAL colours.
- High-quality appearance: all visible parts are coated with real aluminium
- good running properties, light weight
- As ready for installation tambour door module
- 2 end profile variants
- Available colours: Silver coloured anodized or stainless steel coloured
- Extremely good running properties
- As a rolled up system with surface mounted guide tracks or as a rear panel running system with groove mounted guide tracks
- In lengths for individual self-assembly, also available as a roller shutter
- Available colours: White, grey, silver coloured (aluminium effect)
- With shutter guide or rear panel system
- With suitable accessories
- Available colours: Beech, Beech, oak or in silver eloxal
- For kitchens and living rooms
- Quick and easy installation thanks to a ready for installation tambour door module
- Individually manufactured to your required size as a Topco service
- Quick and easy to install tambour door module with guide profiles and spring-loaded shaft
- Suitable for vertical or horizontal running direction
- With recessed guide profiles (stabilising shaft from an internal cabinet width of 1,200 mm)
- Suitable for vertical or horizontal running direction
- Rolled-up version with guide profiles and spring-loaded shaft
- Particularly suitable for large tambour doors
- Quick and easy to install tambour door module with guide profiles and spring-loaded shaft
- For cabinets where only little depth is available.
- Pedestals and sliding cabinets in the office
- Kitchen cabinets
- Relay cabinets
- Security cabinets
- With large tambour doors
- For floor to ceiling tambour doors
- With profiles visible from both sides (counters and serving hatches)
- For easier cleaning of profiles(in canteens, kitchens and in medical areas)
- For increased stability of the roller shutter
- Silver coloured anodized
- Stainless steel coloured, anodized
- Powder coated in RAL colours, gloss degree approx. 75 %
Robust, High-quality, versatile – tambour door systems from Häfele
Thanks to their outstanding workmanship, tambour doors fulfil all quality demandsand are impressive because of their versatility in all areas. | ||
 |  |  |
Select from following tambour door systems
 |  Stability |  |  Stability |  |  Stability |  |  | ||||
Completely robust and high-quality | Appealing and lightweight | Economical, solid and ready for series production | |||||||||
Roller shutter profiles made from extruded solid aluminium | Tambour door slats made from aluminium-coated plastic | Tambour door slats made from plastic | Wooden tambour doors | Glass tambour doors | |||||||
Overview
These tambour doors are characterised by a high quality and rigidity in combination with a particularly careful selection of finishes. They are therefore particularly suited for areas with heavy use or where special protection is required (e.g. bank, IT, medical or laboratory areas).
A1, A2, A3 module and C1, C2, C3 module are tambour door modules that are pre-assembled in accordance with your order specifications and ready for installation. The modules are merely inserted into a cabinet and therefore reduce the installation time to a minimum.
 |  |  |  |
Tambour door A1, A2, A3 module | Version B | Version C | Tambour door C1, C2, C3 module |
Can be used for following cabinet heights and widths
Tambour door | For internal cabinet width mm | For internal cabinet height mm |
A1, A2, A3 module | 382–1600 | 300–1850 |
Version B | Max. 1,200 without stabilising shaft, max. 1,500 mm with stabilising shaft | max. 2,000 |
Version C | 382–2000 | 300–2,000* |
C1, C2, C3 module | 382–1800 | 300–1900 |
* Higher cabinets possible on request | ||
Profile applications
Profile height and the use of single-walled or double-walled profiles influence the stability and therefore the reliability of tambour doors.
Tambour door | Possible profile heights, single/double-walled | ||||
 |  |  |  |  | |
A1, A2, A3 module | X | X | |||
Version B | X | X | X | X | X |
Version C | X | X | X | X | X |
C1, C2, C3 module | X | X | X | X | X |
Weight kg/m2 | 8,5 | 6 | 8 | 5,5 | 7,5 |
Profiles 18 mm and 24 mm for | Profiles 34 mm | Profiles 24 mm and 34 mm, double-walled |
Profile finishes |
All aluminium profiles (except 24 mm with groove design) are available with the following 3 finishes: The 24 mm profile with groove design is not available with stainless steel coloured anodized finish. Special versions available on request. |
Counterbalancing mechanisms
Following counterbalancing mechanisms can be used for version B:
Tambour door | Counterbalancing mechanism | |
Version B with running track and bend |  |  |
Note:
Order counterbalancing mechanism separately and install.
-
Catalog links available.
Please select an Item.
Product details
Features
Dim.
Material
Kit Components
| Description | Finish | Length/Ø | Qty. |
|---|---|---|---|
| Tambour door slat | Aluminum | 3 m (118 1/8”) | 36 pcs.108 m (354’) |
| Top valance | 3 m (118 1/8”) | 1 pc. | |
| Handle slat | 3 m (118 1/8”) | 1 pc. | |
| Surface mount track housing | Aluminum | 3 m (118 1/8”) | 5 pcs.15 m (49’) |
| Internal guide track for mounting inside track | 3 m (118 1/8”) | 5 pcs.15 m (49’) | |
| End cap for tambour slat | 250 pcs. | ||
| Handle cap with stop | 10 pcs. | ||
| Surface mount 90° corner track | Ø50 (2”) | 20 pcs. | |
| Guide wheels | Ø100 (4”) | 20 pcs. | |
| Flat screws for attaching wheels | 20 pcs. | ||
| Washer for attaching wheels | 20 pcs. | ||
| Countersunk screws for attaching corner track | 40 pcs. | ||
| Flat screws for attaching guide track to cabinet | 75 pcs. |
| Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |
Milano Appliance Garage Kit
