Shelf Support, 12 mm, Press-Fit Type

Wall mounting, concealed, For shelf thickness: ≥19 mm

Item no. 283.32.014

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Piece Min. 1
Add to Cart

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Your search for null returned no results.

Shelf Support, 12 mm, Press-Fit Type

Wall mounting, concealed, For shelf thickness: ≥19 mm

  • Dim. in brackets for shelf thickness from 22 mm

28332014 product photo

Wall mounting, concealed, For shelf thickness: ≥19 mm

Item no. 283.32.014

Item no. 283.32.014
Item details

Shelf supports, for invisible fastening of shelves with a 19 mm wood thickness or greater in living room, kitchen, bath and bedroom areas.
Adjustment without tools by turning the plastic sleeve
The hexagonal end on the shelf support permits installation with 1/4" using a cordless drill or a 6 mm open end or box-end wrench
Can be installed directly into masonry walls or woodwork
To make adjustments possible, the insertion hole must be laterally elongated, with a slot drilling machine or a chain mill
Adjust height and level, set the shelf on the shelf supports mounted in the wall and then adjust by turning the plastic sleeves

  • Diameter quoted = Eccentric diameter

Adjustment facility

Height and tilt adjustment: tool-free with eccentric sleeves

For shelf thickness

≥19 mm

Diameter

12.20 mm

Color/finish

Zinc plated

Version

Support bolt with eccentric sleeve, wood-screw thread and wall plug

Area of application

For concealed installation

Material

Steel

Drive

SW6

Installation

For screw fixing to support element
for mounting in drilled hole in shelf

Installation reference

Shelf supports, for invisible fastening of shelves with a 19 mm wood thickness or greater in living room, kitchen, bath and bedroom areas.
Adjustment without tools by turning the plastic sleeve
The hexagonal end on the shelf support permits installation with 1/4" using a cordless drill or a 6 mm open end or box-end wrench
Can be installed directly into masonry walls or woodwork
To make adjustments possible, the insertion hole must be laterally elongated, with a slot drilling machine or a chain mill
Adjust height and level, set the shelf on the shelf supports mounted in the wall and then adjust by turning the plastic sleeves

Supplied with

1 support bolt
2 pre-mounted eccentric sleeves
1 washer
1 Fischer S8H 80R wall plug

Additional information

Max. distance between two shelf supports: 700 mm
The mounting method depends on the wall material: Please check screws and wall plugs in accordance with the type of wall, use other fixing material if necessary.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
04-Dec-2024