Effective damping of noise, drafts, odors and unwanted light incursions between two rooms
With SoftStop on both sides, without soft close
-
Low opening force < 30 N (6.7 lbs.)
-
Sound rating depends on the door and wall construction a maximum sound insulation value of 38 decibels can be achieved.
without soft and self closing mechanism, with shock absorber with retaining spring on both sides
Ceiling installation, Wall mounting, Integrated ceiling installation, Wall pocket solution
Height adjustment: -2 – 2 mm, Height ±4 mmtrack buffer with adjustable retaining spring and cover cap
Soundproofing and thermally separating door systems, Wall pocket solution
Different door width for pocket door solution: 800–1550 mm.
Suspension with suspension carriage, Suspension with recessed support profile
The divider profile is fitted during the production of the pocket structure (model 100 B Pocket Acoustics)
The contact surface for the vertical seal must be provided on site (min. 6 mm projection in relation to the wall structure) e.g. using a block frame or perimeter frame.
Existing plinth strip on site can collide with the vertical seal, plan for doubling if necessary.
Gap dimension to floor: floor gap of 8-12 mm can be taken up by the seal.
The use of a soft and self closing mechanism is possible at the opening side with partially opening doors.
Detailed information about the sound insulating values can be found at www.haefele.de.
2 running gears
2 carrier profiles with suspension plate incl.
M10 bolt
1 SoftStop, with retaining spring and ramp
1 SoftStop, with retaining spring
1 Cover cap set, plastic, aluminum finish
1 adjustment wrench
