Square Knob, Traditional

Clearance

Pewter effect, Iron colored, Length: 26 mm, Width: 26 mm, Height: 23 mm

Item no. 123.06.951

Clearance
Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Piece Min. 1
Add to Cart

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Your search for null returned no results.

Square Knob, Traditional

Pewter effect, Iron colored, Length: 26 mm, Width: 26 mm, Height: 23 mm

  • see key

    A = length
    B = width
    H = height

Filter

Complete your selection

Clearance

Pewter effect, Iron colored, Length: 26 mm, Width: 26 mm, Height: 23 mm

Item no. 123.06.951

Item no. 123.06.951
Item details

Color/finish

Iron colored, Pewter effect

Knob dimensions

26 x 26 mm

Height

23 mm

Material

Iron

Finish code

104IR14

Supplied with

Measuring up:
Apollo® Slab Tech solid surface can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between walls
Tolerance is ±2 mm
Splashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 100 mm
Allow a minimum 50 mm from the cut-out to the front edge
Wherever possible, joints in worktops should fall on a carcase end panel, giving added support to a joint
Joints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-out
Allow a minimum of 120 mm between heated cut-outs
Stainless steel sink cut-outs to manufacturer’s recommendations
Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm
Installation:
Some colours have different levels of pigmentation (particles). This may lead to a variation in the aesthetic appearance of the worktop
Plastering or tiling should be completed after installation
Regular use of the car and maintenance kit should ensure worktops stay in good condition
Installation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry out
No specialist tool required. Can be cut using normal woodworking routers and blades
Plan the worktop layout to ensure jonits don’t fall or within 100 mm of cut-outs

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
10-Aug-2022