Thin Panel Hinge, Grade 1, Screw Mounted

Aximat® 300

Item no. 344.75.730

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Piece Min. 1
Add to Cart

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Your search for null returned no results.

Thin Panel Hinge, Grade 1, Screw Mounted

Aximat® 300

  • see key

    Door Overlay Adjustment Turn screw A to adjust the overlay in both directions.
    Height Adjustment Loosen screws B .Activate the height adjustment by pushing with screwdriver into window C moving tab away, adjust ±2 mm by turning screwdriver. Re-tighten screws.
    Depth Adjustment Loosen special screws D and E , adjust manually in the prolonged hole. Security screw E can be installed at any time, 3D adjustment is still available.

  • Drilling pattern for door

  • Drilling pattern for side panel

  • see key

    Number of hinges per door
    The values in the diagram are sample measurements for doors up to 600 mm wide.
    With doors widths less than 400 mm, the minimum gap must be determined by trial mounting.
    The door’s width must not exceed its height.
    The distance between door edge and uppermost / lowermost hinge should be no more than 100 mm.
    In case of heavy loads and high leverage force, an additional hinge (dim. X max. 100 mm) mounted below the top hinge is recommended.

Filter

Complete your selection

Item details
  • ideal for MRI rooms and outdoor applications
    increased protection against corrosion
    maximum project quality in accordance with ANSI grade 1 (100,000 cycles)

Version

Door overlay: 7.0 mm
Full overlay mounting: Side panel thickness 13 mm
Half overlay mounting: Side panel thickness 19 mm

Color/finish

matt

Mounting

screw fixing

For door material

wood, laminate, Metal

Concealed hinge version

Full overlay/half overlay mounting

Suitable for

Thin doors, for metal/wood materials and laminated panels (HPL)

Material

Stainless steel, Hinge arm: Stainless steel

Installation

For screw fixing

Adjustment facility

Side adjustment facility: -2 – 1 mm, Height adjustment facility: ±2 mm, Depth adjustment facility: ±1 mm, Height adjustment in cup part Depth adjustment via horizontal slots in side component

Cup drilling depth

21 mm

Door overlay

7 mm

Supplied with

Hinge
Fixing material (stainless steel self-tapping screws)
1 twist drill bit ⌀ 3.3 mm per packing unit of 20 items

Optional accessories
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
10-Aug-2022