Thin Panel Institutional Hinge, Aximat® 300, Grade 1, Zinc Alloy

    • Catalog links available.
      Please select an Item.


    Complete your selection

    Thin Panel Institutional Hinge, Aximat® 300, Grade 1, Zinc Alloy

    • see key

      Door Overlay Adjustment Turn screw A to adjust the overlay in both directions.

      Height Adjustment Loosen screws B .Activate the height adjustment by pushing with screwdriver into window C moving tab away, adjust ±2 mm by turning screwdriver. Re-tighten screws.

      Depth Adjustment Loosen special screws D and E , adjust manually in the prolonged hole. Security screw E can be installed at any time, 3D adjustment is still available.

    • Drilling pattern for door

    • Drilling pattern for side panel



    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Call us at 800.423.3531 if you have questions about availability.

    NONE Min. 1
    Add to Cart

    Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

    Product details
    • Specifically designed for thin panels such Phenolic material
    • Sleep sophisticated design, only 5 mm (3/16”) of knuckle is visible
    • 3D adjustment
    • Depth adjustment of ± 1mm is achieved with oblong holes
    • Height adjustment (up and down) of a ±2mm is on the door component
    • The “Safety Screw” can be pre-installed at any time as it does not affect the adjustments, however, it is required.
    • Integrated catch keeps doors closed, no additional magnetic catches required
    • During overlay (side to side) adjustment, the knuckle moves with the door preventing a gap between door’s edge and knuckle
    • Door overlay (side to side) adjustment is on the arm component as opposed to the cup component: offering continuous adjustment of +1/-2 mm in both directions
    • Tested in accordance with ANSI/BHMA Grade 1 standards

    Opening angle

    270 °




    Zinc alloy


    Nickel plated


    When inserting screws into Phenolic material, they may corrode because of the material’s internal properties.

    Screw holes should be slightly tapered in Phenolic material to assure a tight fit.

    Product Features

    Supplied with

    Special non-corroding screws

    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: