Titebond®, Cold Press Veneer Glue

Manuals and Videos
  • Technical documents available.
    Please select an Item.
Titebond Cold Press Glue Specifications
TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.59

Solutions for this product

Filter

Complete your selection

Capacity

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Titebond®, Cold Press Veneer Glue

View 2 Items
00315101 product photo

Titebond®, Cold Press Veneer Glue

1 gallon

Item no. 003.15.101
Select
00315102 product photo

Titebond®, Cold Press Veneer Glue

5 gallon

Item no. 003.15.102
Select
Product details

Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.

Economical alternative to contact cement
Formulated to minimize "bleed-through"
Moderate speed of set
No harmful vaporsSafe - nonflammable

  • APPLICATION GUIDELINES
    Application temperature: Above 50°F
    Open assembly time: 15 minutes (70°F/50°F RH)
    Total assembly time: 15-20 minutes (70°F/50°F RH)
    Minimum required spread: Approximately 6 mils or 250 square feet per gallon
    Methods of application: For most consistent coverage a mechanical spreader is recommended.
    Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
    LIMITATIONS
    Titebond Cold Press for Veneer is specifically designed for veneering and not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before using.
    NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY KEEP FROM FREEZING.


Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
23-Apr-2024