Titebond®, Cold Press Veneer Glue

1 gallon

Item no. 003.15.101

1 gallon

Item no. 003.15.101

Item no. 003.15.101
Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Piece Min. 2
See Required Products
Item details
  • Economical alternative to contact cement
  • Formulated to minimize "bleed-through"
  • Moderate speed of set
  • No harmful vaporsSafe - nonflammable

APPLICATION GUIDELINES

Application temperature: Above 50°F

Open assembly time: 15 minutes (70°F/50°F RH)

Total assembly time: 15-20 minutes (70°F/50°F RH)

Minimum required spread: Approximately 6 mils or 250 square feet per gallon

Methods of application: For most consistent coverage a mechanical spreader is recommended.

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

LIMITATIONS

Titebond Cold Press for Veneer is specifically designed for veneering and not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before using.

NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY KEEP FROM FREEZING.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
21-Jan-2020

Titebond®, Cold Press Veneer Glue

1 gallon