Application temperature: Above 50°F
Open assembly time: 15 minutes (70°F/50°F RH)
Total assembly time: 15-20 minutes (70°F/50°F RH)
Minimum required spread: Approximately 6 mils or 250 square feet per gallon
Methods of application: For most consistent coverage a mechanical spreader is recommended.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond Cold Press for Veneer is specifically designed for veneering and not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before using.
NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY KEEP FROM FREEZING.