Application temperature: Above 50°F
Assembly time after glue application: 15 minutes (70°F/50% RH)
Minimum required spread: 7 mils (typical)
Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off dried excess.
BOND STRENGTH ASTM D-905 (On Hard Maple)
|Temperature||Strength psi||% wood failure|
Do not use for joints below the waterline or continuous submersion. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion.
NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY KEEP FROM FREEZING.