Titebond® II, Extend Wood Glue

APPLICATION GUIDELINES
Application temperature:Above 40°F
Assembly time after glue application: 15 minutes (70°F/50% RH)
Minimum required spread: 7 mils (typical)
Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
BOND STRENGTH ASTM D-905 (On Hard Maple)
Temperature Strength psi % wood failure
Room Temperature 3,510 81
150° Overnight 3,210 61
LIMITATIONS
Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion.
Not FDA approved for indirect food contact. Read MSDS before use.
KEEP FROM FREEZING
KEEP OUT OF THE REACH OF CHILDREN