Add Item to Cart:
Application temperature: Above 50°F.
Assembly time after glue application: 10 minutes (70°/50% RH)
Total assembly time: 20-30 minutes (70°F/50% RH)
Minimum required spread: Approximately 6 mils or 250 square feet per gallon.
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods)
Methods of application: Can beapplied by roller or dip spreader pressurized oil cans, plastic applicators, brush or stick.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore to original form. KEEP OUT OF THE REACH OF CHILDREN
BOND STRENGTH ASTM D-905 (On Hard Maple)
|Temperature||Strength psi||% wood failure|
|Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: firstname.lastname@example.org