Titebond®, Melamine Glue

Titebond®, Melamine Glue
Or select product features below
Add to Cart

Please select an Item

Select product features

Click to compare Items on this page


Product details

  • Bonds melamine and vinyl coated products to porous materials
  • Thicker formulation–fewer runs and drips
  • Low odor–nonflammable
  • Dries clear


Application temperature: Above 40°F.

Open assembly time: 5 minutes (70°/50% RH)

Total assembly time: 10-15 minutes (70°F/50% RH)

Minimum required spread: Approximately 6 mils or 250 square feet per gallon

Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods)

Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.


Not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16” in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN

BOND STRENGTH ASTM D-905 (On Hard Maple)

SubstratesStrength psi% wood failure
Melamine/Melamine Lap Shears329100
Melamine/Particle Board329100
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com

Titebond®, Melamine Glue


Please select an Item via the features or Item table in order to add it to the cart.