Titebond®, Melamine Glue

  • Technical documents available.
    Please select an Item.


Complete your selection



Requested amount is in stock.
Limited stock available.
Item no longer available

Call us at 800.423.3531 if you have questions about availability.

Titebond®, Melamine Glue

00315041 product photo

Titebond®, Melamine Glue

16 oz.

Item no. 003.15.041
00315042 product photo

Titebond®, Melamine Glue

1 gallon

Item no. 003.15.042
00315148 product photo

Titebond®, Melamine Glue

5 gallon

Item no. 003.15.148
Product details

Bonds melamine and vinyl coated products to porous materials
Thicker formulation–fewer runs and drips
Low odor–nonflammable
Dries clear

    Application temperature: Above 40°F.
    Open assembly time: 5 minutes (70°/50% RH)
    Total assembly time: 10-15 minutes (70°F/50% RH)
    Minimum required spread: Approximately 6 mils or 250 square feet per gallon
    Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods)
    Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
    Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

    Not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16” in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN

    Substrates Strength psi % wood failure
    Melamine/Melamine Lap Shears 329 100
    Melamine/Particle Board 329 100

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com