Titebond®, Quick and Thick Multi-Surface Glue

APPLICATION GUIDELINES
Application temperature: Above 50°F.
Assembly time after glue application: 3-5 minutes (70°/50% RH)
Total assembly time: 10-15 minutes (70°F/50% RH)
Minimum required spread: Approximately 6 mils or 250 square feet per gallon
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods)
Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
BOND STRENGTH ASTM D-905 (On Hard Maple)
Temperature Strength psi % wood failure
Room Temperature 3,000 7
150° Overnight 600 0
LIMITATIONS
Not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. One of the substrates being bonded must be porous or semi-porous. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.