Titebond®, Original Wood Glue

Titebond®, Original Wood Glue
Or select product features below
Add to Cart

Please select an Item

Select product features

Click to compare Items on this page

Capacity

Product details

  • Fast set-shortens clamp time
  • Excellent heat and solvent-resistance
  • Excellent sandability
  • Easy cleanup with water
  • Versatile-bonds wood, hardwood, high pressure laminates and particleboard

Chalk temperature indicates the lowest approximate temperature at which the glue, air or materials to be bonded may be to assure a good bond.

APPLICATION GUIDELINES

Application temperature: Above 50°F

Assembly time after glue application: 5 minutes (70°F/50% RH)

Minimum required spread: 7 mils (typical)

Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).

Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing application.

Cleanup: Damp cloth while glue is wet. Scrape off dried excess.

BOND STRENGTH ASTM D-905 (On Hard Maple)

TemperatureStrength psi% wood failure
Room Temperature3,60077
150° Overnight1,60010

LIMITATIONS

Not intended for exterior use or where moisture is likely. For exterior applications use Titebond II Premium Wood Glue. Freezing may not affect the function of the product, but may cause it to thicken. Agitation should restore product to original form.

KEEP FROM FREEZING

Note

Chalk temperature indicates the lowest approximate temperature at which the glue, air or materials to be bonded may be to assure a good bond.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
18-Jul-2018

Titebond®, Original Wood Glue

Note

Please select an Item via the features or Item table in order to add it to the cart.