Titebond®, Quick and Thick Multi-Surface Glue

16 oz.

Item no. 003.57.150

Filter

Complete your selection

Titebond®, Quick and Thick Multi-Surface Glue

16 oz.

16 oz.

Item no. 003.57.150

Item no. 003.57.150

Your search for null returned no results.

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Piece Min. 1
Add to Cart

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Item details

Capacity

(16 oz.) .47 l
  • Bonds most porous and semi-porous materials
  • Extra thick formula helps fill small cracks and gaps
  • No-runs, no-drips
  • Strong initial tack
  • Unaffected by finishes
  • Excellent sandability
  • Water cleanup
  • Nonflammable with no offensive odor
  • Dries clear – paintable
  • Conforms to ASTM D4236

Features

2X faster – 3X thicker than traditional PVA glues

Application

Specifically designed for wood and provides strong bonds on pottery, ceramics, stone, fabric, glass and most materials

BOND STRENGTH ASTM D-905 (On Hard Maple)

TemperatureStrength psi% wood failure
Room Temperature3,0007
150°F Overnight6500

APPLICATION GUIDELINES

Application temperature: Above 50°F.

Assembly time after glue application: 3-5 minutes (70°/50% RH)

Total assembly time: 10-15 minutes (70°F/50% RH)

Minimum required spread: Approximately 6 mils or 250 square feet per gallon

Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods)

Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

LIMITATIONS

Not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. One of the substrates being bonded must be porous or semi-porous. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
26-Sep-2021