Titebond®, UA 920 Sealant

10.1 oz,, Clear

Item no. 003.55.053

Filter

Complete your selection

10.1 oz,, White

Item no. 003.55.053

Item no. 003.55.050

10.1 oz,, Clear

Item no. 003.55.053

Item no. 003.55.053

Your search for null returned no results.

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Piece Min. 12
Item details
  • Permanently flexible and airtight, water-resistant seal
  • Excellent adhesion to most building materials
  • Ideal for interior/exterior applications
  • Soap and water cleanup
  • Paintable with water-based(latex-based) paints
  • VOC-compliant
  • Mildew resistant
  • UV-resistant
  • Suitable for all climates
  • No priming or mixing required
  • 50% total joint movement
  • 800% elongation

Capacity

(10.1) .30 l

APPLICATION GUIDELINES

Application temperature: Above 40°F

Service temperature: -40°F to 180°F

Methods of application: Cartridge/caulking gun

Working time: Approximately 15 minutes for a 1/4” bead.

Working surfaces: For best results, surfaces must be cleaned down to the original substrate, dry and free from any material that may deter adhesion.

Cleanup: Clean tools and excess material with soap and water before it dries. Remove cured sealant by cutting with a sharp-edged tool.

LIMITATIONS

Do not apply if rain is expected within 12 hours. Air, sealant, and surface temperature should be above 40°F. Allow at least 2 hours of drying time before painting with acrylic or elastomeric coatings. If joint depth exceeds 1/4”, use backing material. Not designed for continuous submersion or use below the waterline. Do not use for aquariums.

Note

Titebond UA 920 Clear (8741) will be white during application but will clear within 7-14 days, depending on temperature, humidity and bead size.

  • Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Allow at least 2 hours of drying time before painting with acrylic or elastomeric coatings. If joint depth exceeds 1/4”, use backing material. Not designed for coninuous submersion or use below the waterline. Do not use for aquariums.
  • Titebond UA 920 Clear (8741) will be white during application but will clear within 7 - 14 days, depending on temperature, humidity and bead size.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
03-Jun-2020

Titebond®, UA 920 Sealant

10.1 oz, Clear