APPLICATION GUIDELINES
Application temperature: Above 10°F
Service temperatures: -75°F to 250°F
Methods of application: Cartridge/caulking gun
Working time: Approx. 10-15 minutes for a 1/4” bead
Working surfaces: For best results, surfaces should be clean, dry and free from any material that may deter adhesion.
Cleanup: Clean tools and excess material with minneral spirits before it dries. Scrape dried excess.
LIMITATIONS
Extrudes slightly yellow and dries crystal clear. Air, caulk and surface temperature should be above 10°F. If desired, it may be painted with water-based paint immediately (wet-on-wet). For other types of paints, we recommend a compatibility test. If joint depth exceeds 1/4”, use backing material. Not designed for continuous submersion or use below the waterline. Do not use for aquariums.