Wedge Lock, for No Lock Anti-Tip Interlock

Cylinder Module System

Item no. 237.44.990

  • Master key system organisation

    Locking maps are useful for organising comprehensive master key systems. They make organisation much easier. Generally, a distinction is made between two systems: Simple organisation with a master key (abbreviated to MK) and multi-level organisation with a general master key (abbreviated to GMK).

    Organisation with master key (MK locking systems)

    MK systems have several individual keys (IK) that are keyed to differ, i.e. they are not interchangeable.

     
     

    Then there is the master key (MK), which overrides all of the individual keys and therefore opens every lock in this system.

     
     

    MK locking systems are ideal for small offices with a boss and several employees.

    Organisation with general master key (GMK locking systems)

    GMK systems have both individual keys (IK) and group keys (GK) that are assigned to different IK's. Several GK's can be assigned to one master group key (MGK).

     
     

    The general master key (GMK) then overrides every key in the system.

     
     

    GMK locking systems are used for organisation in large office buildings with several departments and sub-departments.

    Closure direction and closure travel

    Closure travel for cam locks 90°

    Closure travel for cam locks 180°

    Closure direction left

    Closing direction right

    The closure travel is specified by numbers and the closure direction is specified by letters with cam locks. They refer to the installation situations shown in the tables. Locks with closure travel 180° can be altered to all closure travels. Factory set is closure travel 1.

     
     

    Locks with closure travel 90° are either left or right locking locks. The closure direction is here specified by letters. The first letter indicates the factory setting, the closure direction can be altered to the letters specified in brackets by re-positioning the locking cam (example: Closure direction A [D, F, G]).

    Cylinder Module System

    Item no. 237.44.990

    Item no. 237.44.990
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    Call us at 800.423.3531 if you have questions about availability.

    Piece Min. 1
    See Required Products
    Item details
    • Use only with anti-tip system 237.44.113, without lock
    • Prevents jamming due to lockbar bounce caused during shipping
    • The wedge lock is marked “remove after shipping” and usually drops off when the drawers are opened the first time

    Features

    With one lock mounted in a minimum 25 mm front exposed rail.

    Application

    For central locking of desks and credenzas

    Suitable for

    Only use with Snapper Actuator (237.44.113)

    Material

    Plastic

    Model

    Timberline No. WD-100
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    18-Jul-2019

    Wedge Lock, for No Lock Anti-Tip Interlock

    Cylinder Module System

    Note

    Please select an Item via the features or Item table in order to add it to the cart.