Häfele America Co.
- Worldwide
-
Contact
- My Account
-
Log on
Log on
-
Shop Products
- Residential
- Commercial
- Services
- About Häfele
Direct entry
Add Item to Cart:
Please enter the Item No.
Please enter a valid value for the number of Items.
Item number is not correct. Please check.
Item number not found. Please check.
Item currently not available.
- Home
- Products
- Sliding, Folding & Tambour Door Fittings
- Fittings for Architectural
- Assembly Wedge, for Doors Running in the Ceiling
Assembly Wedge, for Doors Running in the Ceiling
2 pcs per sliding door
- TCH_Architectural_Hardware_ 2017 Product page 1.197
- TCH_Architectural_Hardware_ 2017 Product page 1.289
- TCH_Architectural_Hardware_ 2017 Product page 1.61
- TCH_Architectural_Hardware_ 2017 Product page 1.65
- TCH_Architectural_Hardware_ 2017 Product page 1.75
- TCH_Architectural_Hardware_ 2017 Product page 1.77
Product details
Used in conjunction with HAWA Junior 80/B, Junior 120/B and Silenta 150/B
For mounting of sliding doors that are recessed into the ceiling
Allows sliding doors to be hung and removed from track without dismantling the door jambs or trim
Show more information
Show less information
Mounting Information
- When used for a pocket door application either the cover panel has to be designed so it can be removed or a removable 100 mm (4”) wide stop strip has to be mounted on the lock side
- The sliding door should only reach 5 mm (3/16”) into the ceiling or the top jamb
- When closed, the sliding door should not protrude more than 50 mm (2”) into the pocket
Installation Plan
(Included in fitting set), mounting instructions for planning and execution available upon request.
| Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |
Assembly Wedge, for Doors Running in the Ceiling
2 pcs per sliding door
Installation
see keyPlease note during assembly:If a cover panel is fitted, it must be detachable or a removable 100 mm wide stop strip must be mounted on the lock side.The sliding door may run max. 5 mm in the ceiling or in the top frame.The sliding door must not be further away than 50 mm from a cover wall when in closed position.
© 2018 Häfele America Co.
Terms of Sale
Privacy Policy
Terms of Use
Sitemap
Customer Service
Frequently Asked Questions