STW Pin-Tumbler Cylinder Removable Core, Keyed Different
STW Pin-Tumbler Cylinder Removable Core, Zinc-die cast
Item no. 210.45.600
- The subdivision of the required space is specified in height units (HE). In System 32 a height unit corresponds to 64 mm.
- For card index boxes that are placed in the drop‐in bottom, the panel heights for the respective card index supports apply.
- A gap of 3 mm has been deducted from the dimensions with the fixed lock panel and with the extending panel with lock.
- Height units = HE are planning dimensions without gap.
Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.
Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.
All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.
Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.
Rational furniture production
Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.
Inserting and removing cylinder cores without tools
No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.
Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!
Flexibility and economic efficiency – at any time
Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.
Plate cylinder or pin tumbler cylinder?
With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.
One protective cap, several functions !
The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.
Construction dimensions for System 32 installation height
Extending rod lock fitted in extending front panel
Extending rod lock fitted in fixed lock panel
Interior division with
Installation height mm
Lock in extending front panel
Lock in fixed lock panel
|Partition and divider (2 HE / 128 mm)||3||–||429|
|Card index support (2.5 HE /160 mm): DIN A6card index box (2.5 HE): DIN A6 for suspending, without D handle||2||–||365|
|Card index support (3 HE /192 mm): DIN C6card index box (3 HE): DIN A6 for suspending, with D handlecard index box (3 HE): DIN A5 for suspending, without D handle||2||365||429|
|Card index support (3.5 HE /224 mm): DIN A5 / C5card index box (3.5 HE): DIN A5 for suspending, with D handle,card index box (3.5 HE): DIN A5 for suspending, without D handle, with tab||2||429||493|
|Card index support (4 HE /256 mm): DIN A5 / C6 with tab,card index box (4 HE): DIN A5 for suspending, without D handle||2||493||557|
|Card index support (4.5 HE /288 mm): DIN A4 / C4card index box (4.5 HE): DIN A4 for suspending, with D handle||2||557||621|
|Suspension files A4 in compliance with DIN 821(5 HE /320 mm)||2||621||685|
|Suspension file (5.5 HE / 352 mm):CH / A4 suspension file and suspension folder,suspension filing frame||2||685||749|
|Suspension file (6 HE / 384 mm): EDP 12”||2||749||813|