Premium Epoxy Coated Bottom Mounted Slide, Full Extension, Self-Closing, 150 lbs Weight Capacity

  • Type of runner

    The type of runner is determined by the design of the running elements, independently of the mounting method.

    Guide rails

    Plastic rails act as gliding surfaces that support the weight of drawers and their contents.

    Roller guided drawer runners

    The running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and silent moving rollers.

    Ball guided drawer runners

    Steel or plastic balls in ball cages are used as the running elements.Groove mounted runners are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws

    Concealed runners guided by concealed dynamic runners

    Rollers are running elements in running gears.

    Mounting type

    internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.

    Front drawer

    The front panel of the drawer is overlay mounted to the cabinet side panel.

    internal drawer

    Front drawer

    Information about load bearing capacity specifications

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.

    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all indicated fixing holes are screw-connected using suitable fastening material.

    The load bearing capacity of ball bearing runners that are suitable for side and surface mounting is reduced to about 25% if the ball bearing runners are installed horizontally.

    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options

    On shelves

    at the side

    surface mounted

    Suspended

     
     

    On drawers

    Groove mounted

    at the side

    surface mounted

    Concealed

     
     

    On cabinets

    at the side

    Suspended

    base panel mounting

    Installation dimensions

    AL = extension length, L = installation length, SL = drawer length

    Functionality

    In addition to moving drawers and shelves, individual runners also have special functionality and features:

    Self-closing and stay closed feature/hold-in device in closed position

    • The self closing and the stay closed feature of roller runners use a slope in the guide profile that runs toward the last part of the push-in distance of the drawers and gently holds them in the closed position.
    • With ball bearing runners a plastic buffer acts as a hold-in device. The guide profile is slid over it and therefore clamped; the hold-out device works using the same method.
    • With other runners, deformation of the guide profile gently holds the rollers or the ball cages.
    • Many ball bearing runners have an active locking mechanism in the extended and pushed-in position; that is operated using a lever.

    self closing mechanism, Soft and controlled closing mechanism

    • The self closing mechanism of ball bearing and concealed runners is an active spring element that pulls the drawer shut when it reaches the latter part of the closing distance.
    • Pneumatic or oil pressure dampers provide gentle closing by preventing the drawer front panel from slamming against the cabinet.
    • Soft and controlled closing mechanisms for supplementing roller, concealed and pull out cabinet runners are also separately available.

    Tip-on opening

    • Extension mechanism supplementary to concealed runners: Gentle pressure against the handle-free front panel opens the drawer automatically.

    Two-way travel drawer runners

    • Two-way travel drawer runners that are extendable from both sides are used on counters or partition walls – wherever two-sided access to the contents is required.

    Progressive drive

    • Some roller runners are supplied with an integrated progressive effect. Simultaneous runner movement evenly distributes the load and prevents possible jamming with wide drawers.

    Stainless steel and aluminium drawer runners

    • Several drawer runners are also available in stainless steel. These are ideal for use in wet areas and areas in which food or chemicals are being processed.
    • Aluminium ball bearing runners are ideal for significantly reducing the weight of the drawers.

    Cabinet and drawer rail separation

    • With some drawer runners the guide profiles can be separated – either by means of the structural design of the runners or using a release lever. Separating the cabinet rail from the drawer rail makes installation considerably easier and allows the drawers to be removed for all kinds of purposes.
    • With some runners the drawers are suspended from (with ball bearing runners) or placed onto (with concealed runners) the runners at special holders. The concealed runners are equipped with pins for this purpose.
    • Other concealed runners are equipped with mounting clips that secure the drawer to the runners. The drawer can be removed by releasing the mounting clips.

    Remove by operating the release lever in the drawer rail.

    Height and tilt adjustments

    • Some concealed runners and ball bearing runners have height and tilting angle adjusting facilities that allow the front panel to be aligned after installation. Concealed runners also have a side adjusting facility (depending on the model).

    Sliding and pull out cabinet runners

    • Sliding and pull out cabinet runners are particularly suitable for narrow (max. 600 mm per runner) and high (max. 2,500 mm) cabinets – depending on the runners that are used.
    • These runners are bottom running and are additionally guided at the top. This makes them therefore extremely suitable for narrow, angled installation situations, e.g. beneath sloping ceilings or stairs.
    • Cabinets must be secured to prevent toppling.
    • Catalog links available.
      Please select an Item.
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    Call us at 800.423.3531 if you have questions about availability.

    NONE Min. 1
    See Required Products
    Product details
    • Double Captive
    • Self-closing
    • Hight lateral stability due to specially designed profiles
    • Special cabinet rail shape prevents scraping of the rollers
    • With Soft Close and catch to prevent unintended disengaging
    • Guided by: 2 soft rollers for silent moving, 6 friction bearing mounted polyamide rollers
    • Patented middle rail reinforcement, buffer and pull-out prevention clip

    Load bearing capacity

    Per pair: (150 lbs) 68 kg

    Material

    Steel

    Color

    white, RAL 9010
    Show more information
    Optional accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    21-Sep-2019

    Premium Epoxy Coated Bottom Mounted Slide, Full Extension, Self-Closing, 150 lbs Weight Capacity

    Note

    Please select an Item via the features or Item table in order to add it to the cart.