Push-in Fitting, ASR Frame Component
- Rahmenteil/Flächenteil EH/EHS
- Plattenteil EH
- Rahmenteil AS/ASR
- Plattenteil AS
- Winkelteil AD
- Plattenteil EH
Ergänzend: Distanzplatte EH/AS für Plattenteil
Häfele Keku R room system application examples
Wall height max. 6,000 mm
Wall thickness 120 mm or to required thickness
Supporting profiles joined with 70/70 slide-in connectors, connecting strips of panel material (Multiplex, MDF) or 8 mm threaded bars (M8 nuts/washers). Floor-ceiling connection with floor and ceiling profiles and profile connectors. Panels are hooked in with Keku EHS fittings.
Wall distance 40 mm – continuous assembly
The supporting profile is engaged in the floor profile with the profile connector. Height compensation of up to 30 mm is possible. The profile is fixed to the wall with the 3-D wall fastener. Adjustment is possible in all directions with the 3-D wall fastener. The panels are secured to the supporting profiles with Keku fittings.
Ceiling - longitudinal insertion
Supporting profiles suspended with threaded bars, M8 nuts, approved metal plugs and 3D fittings.
On the walls, ceiling profile for mounting the supporting profiles with profile connectors and support of the trim.
Large-surface ceiling panels, slide-in mounting with Keku EHS fittings with lip. Trims with slide-in mounting with Keku ASR fittings. (Only slide in narrow trims). Panel length at intervals (length/32) with same drilling pattern for Keku fittings. With gap profile for panel gap of 3–30 mm.
Top unit doors that are mounted to the supporting profile provide easy access to the building equipment.
More information can be found in the application brochure at www.hafele.com.
Häfele Keku R components
Häfele Keku R is used for interior fitting stores and exhibition booth construction.
The Häfele Keku R room system is a substructure made of aluminium profiles, used for cladding walls and ceilings..
It is also suitable for creating freestanding lightweight and double partitions.
Different fitting components are available for fixing the supporting profiles.
1 supporting profile
2 floor and ceiling profile
3 profile connector
4 3D wall mounting / ceiling installation set
5 3-D wall spacer
6 threaded bar
7 perforated gap profile
8 non-perforated gap profile
9 gap profile securing clip
10 system screw
11 adjusting profile
12 height adjusting screw
13 vertical connector
14 corner bracket 90°
15 gap profile
16 panel connector
17 tie bar
18 H-profile slide-in connector
19 insert suspension fitting
20 slide-in connector
ⓐ ASR frame component
ⓑ AS panel component
ⓒ EHS frame component
ⓓ EH panel component
The Keku R system fittings that are attached to the supporting profile allow cladding elements to be removed and hooked-in again, e.g. for retrofitting.
(1) ASR frame component
(2)AS panel component
(3)3D wall mounting/ceiling installation set
(4)EHS frame component
(5)EH panel component