Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle

Manuals and Videos
  • CAD data available.
    Please select an item.
  • Technical documents available.
    Please select an Item.
Technical data sheet
Technical data sheet
Technical data sheet
TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.103A

Solutions for this product

Filter

Complete your selection

Color/Finish cover

For lid weight

Efficiency factor

Model

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
Call us at 800.423.3531 if you have questions about availability.

Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle

  • Installation instructions

View 6 Items
37227321 product photo

Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle, Model G, anthracite

Item no. 372.27.321
Select
37227322 product photo

Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle, Model H, anthracite

Item no. 372.27.322
Select
37227521 product photo

Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle, Model G, light gray

Item no. 372.27.521
Select
37227522 product photo

Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle, Model H, light gray

Item no. 372.27.522
Select
37227721 product photo

Swing-Up Fitting, Häfele Free Space 6.15

Heavy Duty, for standard applications with handle, Model G, white

Item no. 372.27.721
Select
Product details

Area of application

For heavy Lid Stay applications for door heights from 14" - 26". Door Weights from 14 - 57 Lbs.

Material

Housing: Plastic,
Lever arm and support lever: Steel

Color/finish

Lever arm: Nickel plated

Lid material

Wood

Flap type

one-piece

Opening angle

90 ° or 107°

For cabinet width

≤1,800 mm

For cabinet height

350 – 650 mm

Installation depth

72.00 mm

Installation Depth (inches)

2 7/8"

Adjustment facility

Please use a Pozi Drive #2 bit for all screw installations and adjustments, otherwise damage to screw heads is likely. For door holding power adjustment, use a cordless driver as these screws are geared very low. Dor opening angle can be adjusted to 90° or 107° degrees.

Installation

The fitting mounts to the side panel with a single Euro Screw. The door mounts without tools and slides on to mounting plates.

Order reference

The Free Space 6.15 is not applicable for aluminum framed doors

Supplied with

2 Fittings (right/left)
2 Front fixing brackets with pre-mounted screws
1 Set mounting instructions and paper drilling template

Technical data attributes
Sample measurements table for selecting the right model based on cabinet height and flap weight including handle
Model G, EF≈4080-6600Model H, EF≈6300-9000
Cabinet height mmFlap weight kgFlap weight kg
35011.7–18.918.0–25.7
37510.9–17.616.8–24.0
40010.2–16.515.8–22.5
4259.6–15.514.8–21.2
4509.1–14.714.0–20.0
4758.6–13.913.3–18.9
5008.2–13.212.6–18.0
5257.8–12.612.0–17.1
5507.4–12.011.5–16.4
5757.1–11.511.0–15.7
6006.8–11.010.5–15.0
6256.5–10.610.1–14.4
6506.3–10.29.7–13.8
Planning
Front panel thickness Y mm16181922242628
Distance X mm (with cabinet top panel thickness K=16 mm)11711010796908376
Additional information

Important
Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt.

The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted.

A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely.

Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall.

For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

Optional accessories
Compare selection

Login to add items to Shopping List

ppic-04426749.jpg
Drilling jig, Häfele, Free space
View 1 Item
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
23-Mar-2025