Titebond®, Pro-Grade Plus Caulk

APPLICATION GUIDELINES
Application temperature: Above 40°F
Coverage (maximum): Approximate length of bead according to bead diameter:
Container bead: 1/4" bead 10.1 oz cartridge is 31 ft
Working time: Approx. 10-15 minutes for a 1/4” bead
Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed
joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately.
Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
LIMITATIONS
Not designed for continuous submersion or use below the
waterline. Air, caulk and surface temperature should be above
40°F. Do not apply if rain is expected within 12 hours. Clear
sealant will be white during application but will clear within 7-14
days. Cure time is dependent upon ambient conditions including
temperature and humidity. The caulk should be dry to the touch
and ready to paint in 2-4 hours with a water-based (latex) paint
that does not contain plasticizer. Clear is paintable in 4-6 hours.
For other paint types, a compatibility test is recommended. It is
highly recommended to use backing material. For best results,
store in a dry location at or below 75°F.